This robust 0.872-inch thick Nylon stock sheet is engineered for high-performance hydraulic systems. Offering excellent wear resistance and a low coefficient of friction, it ensures reliable operation in challenging industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.872" |
| Length | 14" |
| Width | 36" |
Designed for demanding industrial environments, this Nylon stock sheet (0.872" thickness, 14" width, 36" length) provides exceptional mechanical strength and impact resistance. Its inherent lubricity and resistance to abrasion make it ideal for components requiring continuous movement under pressure, such as bearing surfaces, seals, and wear pads within hydraulic machinery. The material's chemical inertness further enhances its suitability for diverse hydraulic fluid compatibility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut component using specified fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress concentrations. | Utilize sharp, carbide-tipped blades and a slow feed rate for clean cuts that minimize internal stress. |
| Over-tightening fasteners, causing deformation. | Apply fasteners gradually and evenly, using torque wrenches to adhere to manufacturer specifications. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Pump and valve components, Seals and gaskets in high-pressure systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||