This robust Nylon stock sheet offers superior strength, wear resistance, and chemical inertness. Precisely manufactured for consistent performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.229" |
| Length | 18" |
| Width | 38" |
Built to exacting engineering tolerances, this Nylon stock sheet measures 0.229 inches thick, 18 inches wide, and 38 inches long. Composed of high-grade Nylon 6/6, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction. Its inherent dielectric properties make it suitable for electrical insulation, while its chemical resistance ensures longevity in corrosive environments. This material is ideal for custom fabrication of wear pads, bushings, gears, and protective covers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly. 2. Cut the Nylon sheet to the desired dimensions using appropriate cutting tools. 3. Secure the fabricated component using mechanical fasteners or adhesives suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ specialized router bits or saw blades designed for cutting Nylon to prevent melting and ensure clean edges. |
| Overtightening fasteners, which can crack or deform the Nylon. | Use washers and avoid excessive torque when fastening; consider using expansion bolts for secure mounting. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Protective Covers and Guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||