This high-grade Nylon stock sheet offers exceptional wear resistance, low friction, and high tensile strength, making it a premium choice for hydraulic components and wear pads in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.474" |
| Length | 33" |
| Width | 13" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.474 inches, a length of 33 inches, and a width of 13 inches. Its inherent properties, including excellent abrasion resistance, self-lubricating characteristics, and good chemical resistance, make it suitable for a wide range of hydraulic system components. The material's ability to withstand high loads and its low coefficient of friction contribute to extended service life and reduced system wear in applications such as wear strips, guide bushings, and manifold components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 2. Machine or form the cut material according to design specifications for the specific hydraulic component. 3. Install the finished component within the hydraulic system, ensuring proper fitment and engagement with mating parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or oversized components due to inaccurate cutting. | Employ precision cutting equipment and verify all dimensions against engineering drawings before installation. |
| Exceeding the material's operational temperature limits, leading to degradation. | Consult the material's technical data sheet to confirm its thermal operating range and ensure it aligns with system requirements. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Wear Strips, Guide Bushings in Cylinders, Manifold Components, Sealing Elements, Pump Componentry.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||