This robust Nylon Stock Sheet, engineered for demanding hydraulic environments, offers exceptional wear resistance and impact strength. Its precise dimensions ensure seamless integration into critical components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.728" |
| Length | 29" |
| Width | 36" |
Precision-manufactured to tight tolerances, this 0.728-inch thick Nylon Stock Sheet measures 29 inches in length and 36 inches in width. Composed of high-performance nylon, it exhibits excellent tensile strength, low coefficient of friction, and superior abrasion resistance, making it ideal for wear pads, bearing surfaces, and hydraulic seal components. Its inherent toughness and chemical inertness ensure longevity and reliability in high-pressure hydraulic systems, resisting degradation from common hydraulic fluids and operational stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of debris. 2. Accurately cut the nylon sheet to the required component dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component to the hydraulic system, verifying proper alignment and fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to poor edge quality and potential weakening of the material. | Employ sharp, high-quality cutting tools specifically designed for plastic materials to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause localized stress concentrations and deformation in the nylon sheet. | Tighten fasteners to the recommended torque specifications, utilizing washers if necessary to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Bearing surfaces in pumps and valves, Protective liners for hydraulic fluid reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||