This robust Nylon stock sheet is engineered for critical hydraulic systems. Offering exceptional durability and resistance to wear and impact, it ensures reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.762" |
| Length | 28" |
| Width | 46" |
Specified by design engineers worldwide, this premium Nylon stock sheet provides superior mechanical properties essential for hydraulic component fabrication. Its 0.762" thickness, 28" width, and 46" length offer ample material for custom machining. Exhibiting excellent tensile strength, abrasion resistance, and low coefficient of friction, it is ideal for seals, wear pads, and custom fittings, minimizing friction and extending component lifespan under high pressure and dynamic loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately machine the Nylon stock sheet to the required component dimensions using appropriate tooling for plastics. 2. Ensure all mating surfaces are clean and free from debris before assembly. 3. Install the fabricated Nylon component into the hydraulic system, adhering to manufacturer torque specifications and lubrication guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining Nylon at excessive speeds or with dull tools, leading to melting or chipping. | Utilize sharp, carbide-tipped tooling designed for plastics and maintain moderate cutting speeds with ample coolant or air blast. |
| Over-tightening fasteners or components against the Nylon, causing premature wear or cracking. | Employ appropriate torque specifications and consider using washers to distribute load, especially in dynamic applications. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Plates and Bushings, Custom Hydraulic Manifolds and Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||