This high-performance Nylon Stock Sheet provides exceptional durability and chemical resistance. Its robust construction makes it an ideal material for demanding plumbing and janitorial applications, ensuring long-lasting performance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.448" |
| Length | 17" |
| Width | 24" |
Precision-manufactured to tight tolerances, this 0.448-inch thick Nylon Stock Sheet measures 17 inches in length and 24 inches in width. Nylon's inherent properties, including excellent abrasion resistance, high tensile strength, and good chemical inertness, make it suitable for environments exposed to various cleaning agents and moderate mechanical stress. Its low coefficient of friction facilitates smooth operation in sliding or bearing applications common in plumbing and janitorial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the required dimensions using appropriate tools. 2. Smooth any sharp edges or burrs to prevent damage to surrounding components. 3. Secure the cut piece using standard mechanical fasteners or adhesives suitable for nylon and the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ sharp, specifically designed plastic cutting tools such as fine-toothed saws or routers to ensure clean cuts. |
| Over-tightening fasteners, which can cause stress cracking in the nylon. | Hand-tighten fasteners and use washers to distribute pressure evenly. Avoid power tools for final tightening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pump components, Bearing surfaces in cleaning equipment, Protective liners for chutes and hoppers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||