This robust nylon stock sheet is engineered for high-performance hydraulic systems. Its exceptional strength and self-lubricating properties ensure reliable operation under extreme conditions, extending component lifespan.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.643" |
| Length | 34" |
| Width | 32" |
Designed for demanding industrial environments, this Nylon Stock Sheet boasts a substantial 0.643" thickness, a generous 34" length, and a 32" width, providing ample material for complex component fabrication. Composed of high-grade nylon, it exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, making it an ideal choice for dynamic hydraulic applications such as wear pads, seals, and bearing surfaces where longevity and performance are critical. Its excellent chemical resistance further enhances its suitability for a wide range of hydraulic fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Smooth all cut edges to prevent stress concentration and potential cracking. 3. Securely fasten the fabricated component within the hydraulic system according to design specifications, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to chipping or cracking of the nylon. | Employ carbide-tipped saw blades or waterjet cutting for clean, precise cuts without inducing thermal stress. |
| Failing to properly deburr cut edges, which can cause premature wear or damage to mating parts. | Thoroughly deburr all edges with a file or router bit to achieve a smooth, consistent surface finish. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Wear Rings, Seals and Gaskets, Bushings and Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||