This 0.352" thick nylon stock sheet, measuring 40" x 26", is engineered for high-performance hydraulic systems. Its robust material offers exceptional wear resistance and dimensional stability.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.352" |
| Length | 40" |
| Width | 26" |
Precision-manufactured to tight tolerances, this 0.352" thick Nylon stock sheet (40" L x 26" W) offers superior mechanical strength and excellent impact resistance, crucial for hydraulic component fabrication. Its inherent self-lubricating properties and low coefficient of friction minimize wear and extend the service life of seals, bearings, and wear pads. The material's resistance to water absorption and many common hydraulic fluids ensures consistent performance in demanding operational environments. Ideal for custom machining of hydraulic manifolds, pump components, and valve seats.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces of the component to be fabricated from the stock sheet. 2. Precisely machine the nylon sheet to the required dimensions and tolerances according to engineering drawings. 3. Inspect the finished part for any defects or deviations from specifications before installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools or speeds, leading to poor edge finish or material deformation. | Employ sharp, carbide-tipped tooling and optimize cutting parameters (speed, feed rate) to achieve clean cuts and prevent melting or chipping of the nylon. |
| Insufficient consideration of thermal expansion during machining or application. | Account for nylon's thermal expansion coefficient. Allow for appropriate clearances in designs, especially in applications with significant temperature fluctuations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic seals and wipers, Wear pads and bushings, Custom hydraulic manifold fabrication, Pump and valve components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||