This industrial-grade Nylon Stock Sheet provides exceptional strength, durability, and wear resistance for a wide range of manufacturing and repair applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.137" |
| Length | 22" |
| Width | 38" |
A high-performance industrial component, this Nylon Stock Sheet is engineered for superior mechanical properties. Measuring 0.137 inches thick, 22 inches in width, and 38 inches in length, it is manufactured from robust nylon, renowned for its excellent tensile strength, abrasion resistance, and low coefficient of friction. Its inherent toughness allows it to withstand significant stress and impact without deformation, making it suitable for fabricating custom parts, wear pads, and structural elements in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the nylon stock sheet using a fine-tip marker. 2. Cut the sheet to the desired dimensions using appropriate tools such as a band saw or a heavy-duty utility knife. 3. Smooth any rough edges with a file or sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can melt or chip the nylon. | Employ sharp blades designed for plastics or use tools with controlled heat settings to prevent damage. |
| Not accounting for thermal expansion/contraction in critical applications. | Allow for a small expansion gap if the nylon part will be exposed to significant temperature fluctuations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Protective Guards and Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||