This robust Nylon stock sheet, measuring 0.848" x 38" x 45", is engineered for exceptional performance in demanding hydraulic systems. Its superior material properties ensure longevity and efficiency.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.848" |
| Length | 38" |
| Width | 45" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.848" thickness, providing excellent structural integrity and impact resistance crucial for high-pressure hydraulic environments. The 38" width and 45" length offer versatility for custom fabrication of seals, gaskets, wear pads, and specialized components. Nylon's inherent properties, including low coefficient of friction, high tensile strength, and excellent abrasion resistance, make it an ideal material for reducing wear and tear in dynamic hydraulic applications, ensuring extended service life and minimizing maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the Nylon stock to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated Nylon component using recommended hardware and sealing methods for the specific hydraulic application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers. | Utilize carbide-tipped saw blades or specialized plastic cutting tools to prevent melting and ensure clean edges. |
| Over-tightening fasteners, leading to stress cracking. | Apply fasteners gradually and use washers to distribute load evenly, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Pads and Bushings, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||