High-performance Nylon stock sheet engineered for demanding hydraulic systems. Offers exceptional wear resistance, low friction, and excellent chemical compatibility for robust component fabrication.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.170" |
| Length | 30" |
| Width | 47" |
Specified by design engineers worldwide, this 0.170" thick Nylon stock sheet, measuring 30" in length and 47" in width, is manufactured to exacting standards for critical hydraulic applications. Its inherent properties, including excellent tensile strength, abrasion resistance, and a low coefficient of friction, make it ideal for fabricating seals, bearings, wear pads, and hydraulic manifold components. This material exhibits superior resistance to oils, greases, and many common hydraulic fluids, ensuring long-term performance in challenging operating environments. Rigorous quality control ensures consistent material integrity and dimensional accuracy.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired dimensions using appropriate industrial cutting tools (e.g., CNC router, band saw with fine-tooth blade). 2. Machine components according to design specifications, ensuring tight tolerances. 3. Deburr all edges thoroughly to prevent premature wear or damage to mating surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or uneven edges. | Employ carbide-tipped blades or specialized router bits designed for nylon and plastics, ensuring proper feed rates and cooling if necessary. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the nylon component. | Use appropriate torque specifications and consider incorporating washers or grommets to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Fabrication, Wear Pad and Bushing Manufacturing, Hydraulic Manifold Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||