This robust Nylon stock sheet, measuring 0.285" thick, 31" wide, and 33" long, is engineered for superior performance in demanding heating and cooling environments. Its inherent properties ensure long-term operational integrity.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.285" |
| Length | 31" |
| Width | 33" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.285" thickness, providing excellent structural integrity and insulation properties. Its 31" x 33" dimensions offer ample material for fabricating critical components. Nylon's inherent resistance to a wide range of chemicals, oils, and solvents, coupled with its high tensile strength and abrasion resistance, makes it an ideal choice for applications within HVAC systems, heat exchangers, and air handling units where durability and chemical inertness are paramount for efficient and long-lasting operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Secure the cut sheet using industry-standard fasteners or adhesives, ensuring a tight and leak-free seal where necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ specialized carbide-tipped saw blades or routing bits designed for cutting Nylon to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress concentrations and crack the Nylon. | Use washers and torque fasteners to the manufacturer's recommended specifications to prevent deformation and potential cracking. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC ductwork fabrication, Insulation barriers for heat exchangers, Air handling unit components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||