This robust 0.200" thick Nylon stock sheet offers exceptional durability and low friction. Its substantial size (21" x 47") makes it ideal for a wide range of custom industrial hardware applications requiring wear resistance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.200" |
| Length | 21" |
| Width | 47" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a precise 0.200" thickness, a 21" width, and a 47" length. Composed of high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, minimizing wear in dynamic applications. Its inherent toughness and chemical resistance make it suitable for environments demanding reliable performance, such as wear pads, guide rails, and custom-machined components in machinery and material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet using a fine-tip marker. 2. Cut the sheet to size using appropriate tools for nylon, such as a band saw or CNC router, ensuring clean edges. 3. Secure the cut nylon piece to its intended application using mechanical fasteners or adhesives suitable for nylon, considering load-bearing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard wood or metal cutting tools without proper adjustments for nylon. | Utilize carbide-tipped blades and ensure adequate cooling during cutting to prevent melting and achieve clean cuts. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the nylon. | Employ washers and tighten fasteners to a snug fit without excessive torque, allowing for slight expansion and contraction of the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and pads, Custom machine components, Guide rails and rollers, Electrical insulation, Gaskets and seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||