This premium Nylon stock sheet offers exceptional wear resistance and impact strength, making it ideal for fabricating custom components in high-pressure hydraulic systems. Its robust nature ensures longevity and reliability under extreme conditions.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.118" |
| Length | 38" |
| Width | 22" |
Specified by design engineers worldwide, this Nylon stock sheet (0.118" thickness, 38" length, 22" width) is manufactured from high-grade industrial Nylon. It exhibits excellent tensile strength, low coefficient of friction, and superior resistance to abrasion and chemicals commonly found in hydraulic fluids. These properties make it a superior material choice for seals, wear pads, and custom manifold components, ensuring optimal performance and extended service life in demanding hydraulic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine the component to precise tolerances, ensuring smooth surface finishes for optimal sealing. 3. Install the fabricated Nylon component into the hydraulic system, verifying proper fitment and sealing capabilities.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to rough edges and compromising seal integrity. | Employ sharp, high-speed cutting tools specifically designed for plastics or consult material fabrication guidelines. |
| Overheating the Nylon during machining, causing material degradation and warping. | Utilize appropriate cooling methods (e.g., coolant, air blast) and optimize machining speeds and feeds to prevent excessive heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals, Wear pads and guides, Custom manifold blocks, Bushings and bearings in hydraulic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||