This high-performance nylon stock sheet provides exceptional wear resistance, low coefficient of friction, and superior impact strength. Ideal for custom fabrication of durable components in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.047" |
| Length | 12" |
| Width | 24" |
Engineered for reliability and performance, this 0.047-inch thick nylon stock sheet measures 12 inches by 24 inches. Manufactured from robust nylon, it exhibits excellent tensile strength, chemical resistance, and electrical insulation properties. Its inherent lubricity reduces wear and friction, making it suitable for applications such as bearing surfaces, wear pads, bushings, and custom jigs and fixtures where durability and low maintenance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet using a suitable marking tool. 2. Carefully cut the sheet to size using a high-speed saw with a fine-tooth blade, or a laser cutter. 3. Secure the cut piece using appropriate fasteners, ensuring minimal stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper blade selection, leading to melting or chipping. | Utilize blades designed for plastics, such as carbide-tipped or diamond-edged blades, and maintain a high cutting speed with a slow feed rate. |
| Over-tightening fasteners, which can cause stress cracking in the nylon. | Employ washers to distribute load and tighten fasteners to a snug fit, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom bushings and bearings, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||