This premium Nylon stock sheet offers exceptional durability and wear resistance, making it a superior choice for demanding hydraulic applications. Its precise dimensions ensure consistent performance and reliable component fabrication.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.069" |
| Length | 43" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.069-inch thick Nylon stock sheet (43-inch length, 32-inch width) delivers superior performance in hydraulic systems. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and good chemical resistance to oils and solvents, make it ideal for fabricating seals, gaskets, wear pads, and custom hydraulic components. Its high tensile strength and impact resistance ensure longevity and operational integrity under pressure and dynamic loading.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired component dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., CNC router, laser cutter) to achieve precise shapes and tolerances. 3. Smooth any sharp edges or burrs with fine-grit sandpaper or a deburring tool to prevent damage to mating surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools that can cause excessive heat and melting of Nylon. | Employ cutting tools designed for plastics, utilizing appropriate speeds and cooling methods to prevent melting and ensure clean cuts. |
| Failing to account for Nylon's slight expansion/contraction due to temperature and moisture. | Allow for a small tolerance in design and assembly to accommodate potential dimensional changes in Nylon under varying environmental conditions. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Rings and Guides, Bushings and Bearings, Custom Hydraulic Manifold Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||