This high-performance 0.821" thick Nylon stock sheet offers exceptional durability and resistance, making it ideal for demanding pressure and temperature control applications across various industries.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.821" |
| Length | 43" |
| Width | 42" |
A proven choice for industrial professionals, this Nylon stock sheet boasts a substantial 0.821" thickness, a generous 43" length, and a 42" width, providing ample material for diverse fabrication needs. Engineered from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range suitable for both moderate pressure and thermal management systems. Its inherent lubricity and low coefficient of friction also contribute to reduced wear in dynamic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component using industry-standard mechanical fasteners or bonding agents suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools that can cause delamination or rough edges. | Employ sharp, specialized cutting tools designed for plastics to ensure clean and precise cuts. |
| Over-tightening fasteners, which can lead to cracking or deformation of the Nylon. | Use controlled torque settings when fastening and consider washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Component fabrication for pressure vessel liners, Sealing elements in high-temperature fluid systems, Wear pads and guides in automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||