This premium Nylon stock sheet is engineered for superior performance in demanding pressure and temperature control applications. Its robust material properties ensure reliability and longevity in critical industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.121" |
| Length | 23" |
| Width | 12" |
Built to exacting engineering tolerances, this Nylon stock sheet boasts a precise thickness of 0.121 inches, a length of 23 inches, and a width of 12 inches. Crafted from high-grade Nylon, it exhibits excellent tensile strength, wear resistance, and a low coefficient of friction, making it ideal for seals, gaskets, bearings, and wear pads in systems requiring effective pressure and temperature management. Its inherent chemical resistance further enhances its suitability for diverse operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet to the intended application surface using industrial-grade adhesives or mechanical fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an undersized sheet that does not provide adequate coverage. | Always verify the required dimensions and ensure the stock sheet is cut to allow for proper overlap or sealing. |
| Applying excessive force during installation, leading to material deformation. | Install with controlled pressure, allowing the Nylon's natural flexibility to conform to the application without compromise. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gasket and Seal Fabrication, Wear Strips and Bushings, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||