This premium Nylon stock sheet offers exceptional durability and resistance, making it ideal for critical pressure and temperature control applications in harsh industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.909" |
| Length | 14" |
| Width | 20" |
Designed for demanding industrial environments, this 0.909" thick Nylon stock sheet (14" x 20") exhibits superior mechanical strength, excellent wear resistance, and good chemical inertness. Its high tensile strength and low coefficient of friction ensure reliable performance under significant pressure and varying temperatures. This material is resistant to common solvents and oils, making it suitable for sealing, gasketing, and component fabrication where thermal and pressure fluctuations are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Accurately cut the Nylon sheet to the required dimensions using appropriate tooling. 3. Securely fasten the component according to design specifications, ensuring proper sealing pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for Nylon, leading to chipping or melting. | Utilize sharp, high-speed cutting tools specifically recommended for machining plastics like Nylon to achieve clean cuts and prevent thermal degradation. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Apply torque evenly and within the manufacturer's recommended range for Nylon, utilizing washers if necessary to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Sealing and Gasketing in High-Pressure Systems, Component Fabrication for Temperature Regulators, Wear Strips and Bushings in Control Mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||