This premium Nylon stock sheet is engineered for exceptional performance in challenging heating and cooling environments. Its robust material properties ensure durability and reliability in industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.867" |
| Length | 46" |
| Width | 12" |
Precision-manufactured to tight tolerances, this 0.867-inch thick Nylon sheet (46-inch length, 12-inch width) offers superior dimensional stability and mechanical strength. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and good thermal insulation, make it ideal for applications requiring continuous operation under varying temperatures. Its resistance to many chemicals further enhances its suitability for diverse industrial settings within heating and cooling systems, such as insulation components, wear pads, and structural supports.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut Nylon component using suitable industrial fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics. | Utilize carbide-tipped saw blades or specialized plastic cutting tools to prevent chipping and ensure clean edges. |
| Over-tightening fasteners, leading to material deformation. | Employ washers and torque fasteners to recommended levels to avoid cracking or excessive stress on the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Thermal insulation barriers in HVAC systems, Wear-resistant components in conveyor systems, Structural supports and spacers in heat exchangers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||