This robust Nylon stock sheet offers exceptional durability and resilience, making it ideal for pressure and temperature control applications in challenging industrial settings. Its precise dimensions ensure reliable performance and integration.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.138" |
| Length | 15" |
| Width | 46" |
Designed for demanding industrial environments, this Nylon stock sheet exhibits superior mechanical strength, excellent abrasion resistance, and good chemical compatibility. With a precise thickness of 0.138 inches, a length of 15 inches, and a width of 46 inches, it provides ample material for fabricating custom components. Nylon's inherent properties, including its high tensile strength and thermal stability, make it suitable for seals, gaskets, wear pads, and protective barriers subjected to moderate pressures and fluctuating temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools. 2. Prepare mounting surfaces ensuring cleanliness and flatness. 3. Secure sheet using approved fasteners or adhesives, ensuring a tight seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to uneven edges and potential weakening. | Utilize a sharp, industrial-grade saw or laser cutter specifically designed for plastics to achieve precise and clean cuts. |
| Over-tightening fasteners, which can cause stress concentrations and crack the Nylon. | Hand-tighten fasteners initially, then use a torque wrench to apply the manufacturer-recommended torque specification for Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gasket Fabrication, Wear Strips and Bushings, Protective Shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||