This 0.712-inch thick Nylon stock sheet is engineered for demanding pressure and temperature control applications. Offering exceptional durability and chemical resistance, it provides reliable performance in critical industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.712" |
| Length | 30" |
| Width | 33" |
Specified by design engineers worldwide, this premium Nylon stock sheet boasts a substantial 0.712" thickness, a 30" length, and a 33" width. Its inherent toughness, excellent wear resistance, and good thermal stability make it ideal for components subjected to elevated pressures and temperatures. The material's low coefficient of friction also contributes to its suitability in dynamic applications requiring smooth operation and minimal thermal expansion under load. This sheet is manufactured to rigorous standards, ensuring consistent material properties and superior performance in demanding operational parameters.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component using recommended hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper tool selection for cutting Nylon, leading to chipping or melting. | Utilize sharp, high-speed steel or carbide-tipped cutting tools designed for plastics. Employ a moderate feed rate and adequate lubrication to prevent overheating. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Employ torque-limiting tools and follow recommended torque specifications for Nylon components to avoid excessive pressure and damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure vessel liners, Thermal insulation components, Sealing elements in high-pressure systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||