This robust 0.953-inch thick Nylon stock sheet, measuring 15" x 46", provides exceptional durability and performance for critical heating and cooling system components. Its inherent strength and wear resistance make it a superior choice for demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.953" |
| Length | 15" |
| Width | 46" |
Engineered for reliability and performance, this 0.953" thick Nylon stock sheet offers superior mechanical strength and excellent abrasion resistance crucial for demanding heating and cooling applications. Its dimensions of 15" in width and 46" in length provide ample material for custom fabrication of seals, gaskets, bearings, and wear pads. The inherent properties of Nylon, including good chemical resistance and low friction, ensure long-term operational integrity and reduced maintenance in environments subject to thermal cycling and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Precisely cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut component using suitable fastening methods such as mechanical fasteners or adhesives, ensuring a tight and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to chipping or uneven edges. | Utilize sharp, carbide-tipped blades designed for cutting plastics to achieve clean and precise cuts. |
| Inadequate surface preparation before installation, leading to poor adhesion or fit. | Thoroughly clean and degrease both the Nylon sheet and the mounting surface to ensure optimal contact and adhesion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC component fabrication, Ductwork liners, Seals and gaskets for thermal management systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||