This premium nylon stock sheet offers exceptional durability and performance. Engineered for robust hydraulic systems, it provides superior wear resistance, impact strength, and chemical inertness for extended service life.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.934" |
| Length | 13" |
| Width | 40" |
Precision-manufactured to tight tolerances, this 0.934" thick nylon stock sheet measures 13" in width and 40" in length. Composed of high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and low coefficient of friction, making it ideal for components within hydraulic systems. Its inherent toughness and resistance to many oils, greases, and solvents ensure reliable operation in challenging environments, from wear pads and seals to custom-fabricated hydraulic manifolds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free of debris. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component firmly to the hydraulic system using specified fasteners or bonding agents.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cleaning of mating surfaces leading to premature seal failure. | Thoroughly clean all mating surfaces with an approved solvent to remove any residual oils, dirt, or contaminants. |
| Using standard cutting tools not designed for nylon, resulting in rough edges and poor dimensional accuracy. | Utilize sharp, high-speed steel or carbide-tipped cutting tools specifically designed for machining plastics like nylon to achieve clean cuts and precise dimensions. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Wear pads and guides, Custom-fabricated hydraulic manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||