This robust Nylon Stock Sheet, measuring 0.439 inches thick, 27 inches in length, and 33 inches in width, provides exceptional durability and wear resistance for a wide range of hardware and industrial components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.439" |
| Length | 27" |
| Width | 33" |
Built to exacting engineering tolerances, this Nylon Stock Sheet is manufactured from high-grade nylon, renowned for its superior mechanical strength, excellent abrasion resistance, and good impact toughness. The precise dimensions of 0.439" thickness, 27" length, and 33" width ensure consistent performance and fit in critical applications. Its inherent lubricity and chemical resistance make it ideal for use in sliding components, wear pads, gears, and structural elements within demanding industrial environments where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping of the nylon sheet are performed using appropriate tooling designed for plastics, such as carbide-tipped blades or routers, to prevent material degradation. 2. Verify that the mating surfaces are clean and free from debris before assembly to ensure proper contact and load distribution. 3. Secure the nylon component using fasteners that account for nylon's thermal expansion and contraction, and avoid over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metalworking tools without proper setup, leading to melting or chipping of the nylon. | Employ specialized cutting tools for plastics, maintain appropriate feed rates and speeds, and consider flood cooling or air blast for heat dissipation. |
| Over-tightening fasteners, causing stress concentrations and potential cracking in the nylon. | Use washers to distribute load and tighten fasteners to the manufacturer's recommended torque specifications for nylon, or consider threaded inserts if higher clamping forces are required. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Protective Bumpers and Guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||