This high-performance Nylon Stock Sheet offers exceptional wear resistance and impact strength, making it a reliable choice for demanding hydraulic systems. Its controlled manufacturing ensures consistent quality for critical components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.225" |
| Length | 25" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 0.225-inch thick Nylon stock sheet measures 25 inches in length and 15 inches in width. Composed of durable Nylon 6, it exhibits excellent abrasion resistance, low coefficient of friction, and good chemical resistance, making it suitable for applications requiring longevity and reduced wear. Its inherent toughness and self-lubricating properties contribute to its effectiveness in hydraulic seals, wear pads, and guide bushings where continuous friction and pressure are present.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon sheet is clean and free from debris. 2. Cut the sheet to the required dimensions using appropriate tooling for nylon. 3. Install the fabricated component into the hydraulic system, verifying proper fit and clearance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools which can lead to delamination or uneven edges. | Utilize sharp, carbide-tipped cutting tools designed for plastics and ensure proper feed rates and cooling. |
| Exposing the Nylon to excessive heat during fabrication, causing material degradation. | Employ cooling methods such as air or fluid cooling during machining operations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Strips and Bushings, Guide Rails and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||