This robust Nylon stock sheet provides superior wear resistance and low friction, making it ideal for fabricating durable components in hydraulic systems. Its resilience ensures long-term operational integrity.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.297" |
| Length | 34" |
| Width | 18" |
Engineered for reliability and performance, this 0.297-inch thick Nylon stock sheet, measuring 34 inches in length and 18 inches in width, is formulated for demanding hydraulic environments. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and a low coefficient of friction, make it an exceptional material for seals, bearings, and wear pads. Its ability to withstand significant pressure and resist degradation from hydraulic fluids ensures extended component life and reduced maintenance in critical systems. The substantial dimensions allow for the fabrication of large or multiple custom parts with minimal waste.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the Nylon stock sheet to the required component dimensions using appropriate tooling. 2. Smooth all cut edges to remove burrs and ensure a precise fit within the hydraulic assembly. 3. Install the fabricated Nylon component according to the specific hydraulic system's design and maintenance manual.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, dedicated plastic-cutting tools such as router bits or specialized saws, ensuring proper feed rates and cooling to prevent material damage. |
| Over-tightening fasteners when securing Nylon components, which can cause stress cracking. | Employ torque-limiting tools and follow recommended torque specifications for Nylon, allowing for its slight expansion and contraction with temperature changes. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear pads, Seals and backup rings, Bushings and bearings for hydraulic pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||