This premium Nylon stock sheet offers superior durability and thermal performance for critical heating and cooling system components. Its robust construction ensures longevity and reliable operation in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.923" |
| Length | 43" |
| Width | 45" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a substantial 0.923" thickness, measuring 43" in length and 45" in width. Engineered for exceptional mechanical strength, abrasion resistance, and a broad operating temperature range, it is ideally suited for applications within heating and cooling systems. Its inherent chemical resistance and low coefficient of friction further enhance its suitability for seals, gaskets, bearings, and structural components exposed to thermal cycling and moderate pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the cut component using approved mechanical fasteners or adhesives suitable for Nylon and the operational environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress concentrations. | Utilize sharp, carbide-tipped cutting tools and employ a slow, consistent feed rate to minimize heat buildup and prevent micro-fractures. |
| Using incompatible adhesives or fasteners. | Consult the material compatibility chart for Nylon to select adhesives and fasteners that will not degrade or compromise the structural integrity of the sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC component fabrication, Industrial fan and blower parts, Thermal insulation structural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||