This high-performance Nylon stock sheet, measuring 0.058" thick by 41" wide and 35" long, offers exceptional durability and chemical resistance for critical heating and cooling system components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.058" |
| Length | 41" |
| Width | 35" |
Engineered for reliability and performance, this Nylon stock sheet boasts a precise 0.058" thickness, 41" width, and 35" length, ensuring consistent material properties for demanding applications. Its inherent toughness, excellent abrasion resistance, and good thermal stability make it an ideal choice for ductwork, insulation barriers, and protective coverings within HVAC systems. The material's low friction coefficient also contributes to efficient airflow and reduced wear in dynamic components. Rigorous quality control ensures dimensional accuracy and material integrity for predictable performance under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and dry. 2. Cut the Nylon stock sheet to the required dimensions using a sharp industrial blade or saw. 3. Secure the sheet using appropriate fasteners or adhesives compatible with Nylon and the substrate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools that may cause fraying or uneven edges. | Employ carbide-tipped blades or a laser cutter for clean, precise cuts on Nylon stock. |
| Inadequate surface preparation leading to poor adhesion of sealants or fasteners. | Thoroughly degrease and abrade the Nylon surface prior to bonding or fastening for optimal mechanical strength. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC Duct Linings, Insulation Support Structures, Protective Covers for Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||