This robust Nylon stock sheet offers exceptional durability and performance for critical hydraulic systems. Engineered for resilience, it ensures reliable operation in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.270" |
| Length | 34" |
| Width | 37" |
A proven choice for industrial professionals, this Nylon stock sheet (0.270" thickness, 34" length, 37" width) provides superior tensile strength, excellent abrasion resistance, and low friction coefficient, making it ideal for hydraulic components. Its inherent toughness and resistance to a wide range of chemicals and fuels allow for extended service life in high-pressure environments. This material is commonly fabricated into seals, bushings, wear pads, and other functional parts where impact and wear resistance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely install the fabricated component within the hydraulic system, adhering to all relevant design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for Nylon, leading to chipping or melting. | Utilize sharp, high-speed cutting tools specifically designed for plastics, such as carbide-tipped saws or routers, with adequate cooling. |
| Over-tightening fasteners when securing Nylon components, causing cracking. | Employ appropriate torque specifications for fasteners and consider using washers to distribute load evenly, allowing for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Fabrication, Wear Pad Manufacturing, Bushings and Bearings for Hydraulic Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||