This industrial-grade Nylon stock sheet, measuring 0.988 inches thick, is engineered for demanding hydraulic applications. Its robust material properties ensure exceptional durability and performance under pressure.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.988" |
| Length | 25" |
| Width | 17" |
Specified by design engineers worldwide, this Nylon stock sheet boasts a precise thickness of 0.988 inches, a length of 25 inches, and a width of 17 inches. Fabricated from high-grade nylon, it exhibits excellent tensile strength, superior abrasion resistance, and remarkable impact toughness, making it an ideal material for fabricating critical hydraulic components such as wear pads, bearing cages, and custom seal housings. Its inherent lubricity also contributes to reduced friction and extended component life in dynamic hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon sheet to the required dimensions using appropriate machining tools. 2. Smooth all cut edges to prevent stress concentration and ensure a clean finish. 3. Securely fasten the fabricated component within the hydraulic assembly, adhering to all design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper machining causing excessive heat buildup and material degradation. | Utilize sharp cutting tools and employ flood cooling during machining to maintain optimal operating temperatures. |
| Over-tightening fasteners, leading to stress cracking in the nylon. | Apply torque specifications carefully during assembly, using appropriate washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Bushings, Wear Plates for Pumps, Custom Seal Back-up Rings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||