This robust Nylon Stock Sheet provides exceptional durability and chemical resistance. Engineered for demanding industrial applications, it offers reliable performance in pressure and temperature control systems, ensuring longevity and operational efficiency.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.983" |
| Length | 34" |
| Width | 35" |
Engineered for reliability and performance, this 0.983-inch thick Nylon Stock Sheet measures 34 inches in length and 35 inches in width. Composed of high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range suitable for pressure and temperature control applications. Its inherent lubricity and resistance to common industrial chemicals make it a superior choice for seals, bearings, and wear components where precision and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mating surfaces thoroughly. 2. Accurately cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut nylon component using specified fasteners or bonding agents, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to rough edges or material degradation. | Employ sharp, high-speed cutting tools specifically designed for plastics, such as carbide-tipped saws or routers, to ensure clean cuts and preserve material integrity. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Apply torque according to manufacturer specifications or use appropriate washers to distribute load evenly, preventing excessive stress on the nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Sealing components in high-pressure hydraulic systems, Wear pads and bushings in temperature-controlled machinery, Gaskets and diaphragms for chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||