This robust Nylon stock sheet offers superior wear resistance and impact strength, making it ideal for custom hydraulic components. Its dense structure ensures excellent dimensional stability under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.945" |
| Length | 22" |
| Width | 41" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.945 inches, a length of 22 inches, and a width of 41 inches. Engineered from high-grade Nylon 6/6, it exhibits excellent tensile strength, abrasion resistance, and low coefficient of friction, crucial for hydraulic seals, wear pads, and bearing surfaces. Its inherent self-lubricating properties minimize wear and extend component lifespan in high-pressure fluid systems. The material's resistance to a wide range of hydraulic fluids ensures reliability in diverse operating environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Ensure all mating surfaces are clean and free from debris to achieve proper seating. 3. Install the fabricated component according to the specific hydraulic system design requirements and pressure ratings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon for high-pressure hydraulic applications. | Utilize Nylon stock specifically rated for hydraulic systems to ensure adequate strength and fluid compatibility. |
| Improperly tolerancing cuts leading to leaks. | Maintain tight manufacturing tolerances during fabrication to ensure a leak-proof seal within the hydraulic system. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Fabrication, Custom Wear Pads and Bushings, Manifold Component Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||