This robust Nylon stock sheet is engineered for demanding hydraulic applications. Its exceptional wear resistance and impact strength ensure reliable performance and extended service life in critical fluid power systems.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.942" |
| Length | 35" |
| Width | 43" |
A high-performance industrial component, this Nylon stock sheet offers superior toughness, excellent abrasion resistance, and good chemical inertness, making it ideal for hydraulic system components. With precise dimensions of 0.942 inches in thickness, 35 inches in length, and 43 inches in width, it provides ample material for machining custom seals, wear pads, and guide elements. Its inherent self-lubricating properties minimize friction and wear, contributing to the longevity and efficiency of hydraulic machinery under rigorous operating conditions. This material is specifically selected for its ability to withstand high pressures and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of debris. 2. Accurately measure and mark the required dimensions for cutting or machining. 3. Fabricate components using appropriate machining techniques for Nylon, ensuring tight tolerances and smooth finishes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers. | Employ sharp, carbide-tipped cutting tools specifically designed for machining plastics and polymers to prevent melting and chipping. |
| Overheating during machining, leading to material degradation. | Utilize adequate cooling strategies, such as flood coolant or air blasts, and maintain appropriate cutting speeds to manage heat build-up. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Seals and gaskets for high-pressure systems, Guide bushes and bearing elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||