This premium Nylon stock sheet is engineered for high-pressure hydraulic systems, providing exceptional durability and resistance to wear and impact. Ideal for custom fabricated components requiring robust performance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.935" |
| Length | 47" |
| Width | 43" |
Specified by design engineers worldwide, this Nylon stock sheet offers superior mechanical properties crucial for demanding hydraulic applications. With a precise thickness of 0.935 inches, a substantial length of 47 inches, and a width of 43 inches, it provides ample material for complex part fabrication. Its inherent toughness, excellent abrasion resistance, and low coefficient of friction make it an ideal choice for seals, bearings, wear pads, and hydraulic manifold components where dimensional stability and longevity are paramount. This grade is formulated to withstand the rigors of hydraulic fluid exposure and operational stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for polymer materials. 3. Securely fasten the fabricated Nylon component using recommended fasteners and assembly procedures for the specific hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon for high-pressure hydraulic systems. | Always specify and use hydraulic-grade Nylon stock sheets for applications involving high pressures and hydraulic fluids to ensure material integrity and performance. |
| Improper cutting techniques leading to stress concentrations. | Employ sharp, specialized cutting tools for Nylon and maintain a steady feed rate to avoid excessive heat buildup and internal stresses in the cut material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Rings and Bushings, Hydraulic Manifold Blocks, Pump Components, Valve Seats.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||