High-performance Nylon stock sheet engineered for demanding hydraulic applications. Its robust material properties ensure exceptional durability, wear resistance, and low friction, making it ideal for critical components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.865" |
| Length | 20" |
| Width | 45" |
Trusted by engineers across multiple sectors, this 0.865-inch thick Nylon stock sheet, measuring 20 inches in length and 45 inches in width, offers superior mechanical strength and excellent abrasion resistance. Its inherent lubricity minimizes friction, reducing wear and extending component lifespan in high-pressure hydraulic environments. Ideal for custom-machined seals, wear pads, and structural components requiring a reliable, long-lasting material solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is properly cut and machined to the required dimensions for the hydraulic component. 2. Clean mating surfaces thoroughly to remove any debris or contaminants. 3. Carefully install the machined Nylon component into the hydraulic assembly, ensuring proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect machining speeds, leading to excessive heat buildup and potential material degradation. | Utilize appropriate cutting speeds and lubrication during machining to maintain material integrity and achieve precise tolerances. |
| Over-tightening fasteners when securing Nylon components, which can cause stress cracking or deformation. | Employ proper torque specifications for fasteners, considering Nylon's inherent flexibility, to avoid over-compression and ensure a secure fit. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Pads and Bushings, Custom Machined Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||