This robust Nylon stock sheet, engineered for demanding pressure and temperature control applications, offers exceptional strength and thermal stability for critical system components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.845" |
| Length | 36" |
| Width | 28" |
Built to exacting engineering tolerances, this 0.845-inch thick Nylon stock sheet measures 36 inches in length and 28 inches in width. Formulated for superior mechanical strength, excellent wear resistance, and a broad operating temperature range, this material is ideal for components subjected to significant pressure fluctuations and thermal cycling. Its inherent lubricity and resistance to moisture absorption make it suitable for fluid handling systems and dynamic sealing applications where dimensional stability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is cut to the required dimensions using appropriate industrial cutting tools. 2. Clean and deburr all edges of the cut component to prevent stress concentration. 3. Install the component according to the specific design requirements and operational parameters of the pressure or temperature control system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick nylon, leading to melting or uneven edges. | Employ high-speed steel or carbide-tipped cutting tools with adequate cooling to maintain clean, precise edges. |
| Over-tightening fasteners, causing localized stress and potential cracking in the nylon component. | Utilize appropriate torque specifications and consider using washers to distribute load evenly when fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure valve seats and seals, Temperature control system components, Wear pads and guide bushings in dynamic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||