This premium Nylon stock sheet provides exceptional durability and wear resistance, making it the superior choice for robust hydraulic components. Engineered for demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.838" |
| Length | 25" |
| Width | 45" |
Specified by design engineers worldwide, this 0.838-inch thick Nylon stock sheet, measuring 25 inches by 45 inches, offers superior mechanical strength and excellent abrasion resistance. Its high tensile strength and low coefficient of friction ensure reliable performance in high-pressure hydraulic systems, minimizing wear on mating components. Ideal for fabricated seals, wear pads, and custom hydraulic manifolds, this material provides a cost-effective solution for extended service life and reduced maintenance intervals in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling. 3. Smooth all cut edges to prevent stress concentration and potential cracking during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to chipping or melting. | Employ sharp, specialized cutting tools for plastics, such as carbide-tipped blades, and maintain appropriate feed rates to prevent excessive heat buildup. |
| Over-tightening fasteners when integrating fabricated parts, causing stress fractures. | Utilize torque-limiting tools and follow recommended torque specifications for Nylon components to avoid over-compression and potential material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Components, Wear Strips and Bushings, Manifold Blocks and Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||