Engineered for high-pressure hydraulic systems, this robust 0.833" thick Nylon stock sheet provides exceptional wear resistance, low coefficient of friction, and excellent machinability. Its dimensional stability ensures reliable performance in demanding industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.833" |
| Length | 24" |
| Width | 39" |
Designed for demanding industrial environments, this Nylon stock sheet offers a substantial 0.833" (21.16 mm) thickness, 24" (609.6 mm) width, and 39" (990.6 mm) length. Composed of high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, making it ideal for fabricating wear pads, seals, bearings, and other components within hydraulic systems subjected to high loads and dynamic movement. Its inherent toughness and chemical resistance ensure longevity and dependable operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Prepare mating surfaces to ensure proper fit and minimize stress concentrations. 3. Install the fabricated Nylon component, ensuring secure and correct seating within the hydraulic assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ sharp, high-speed steel or carbide-tipped cutting tools specifically designed for machining Nylon to achieve clean, precise cuts. |
| Over-tightening fasteners, causing localized stress and potential cracking of the Nylon. | Use torque-limiting wrenches and consider incorporating washers to distribute load evenly when fastening Nylon components. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Rod Scrapers, Wear Strips and Bushings, Hydraulic Pump Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||