This industrial-grade Nylon stock sheet offers exceptional toughness and wear resistance. Its robust physical properties make it ideal for custom fabrication in demanding environments. Precision manufactured for reliability.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.827" |
| Length | 27" |
| Width | 43" |
Specified by design engineers worldwide, this 0.827" thick Nylon stock sheet provides superior mechanical strength, excellent impact resistance, and a low coefficient of friction. Its inherent lubricity reduces wear in moving parts, while its chemical inertness ensures resistance to a broad range of solvents and corrosive agents. This material's high tensile strength and dimensional stability make it suitable for critical components in machinery, tooling, and structural elements requiring long service life under load and environmental stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark desired cut lines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with fine-tooth blade) for precise material removal. 3. Employ suitable fastening methods (e.g., mechanical fasteners, adhesives) as per application requirements and load considerations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard saw blades not designed for plastics, leading to melting or chipping. | Employ a fine-tooth, carbide-tipped blade specifically designed for cutting nylon or similar plastics to ensure clean, precise cuts. |
| Applying excessive heat during machining, causing material deformation or degradation. | Maintain moderate cutting speeds and use coolant where appropriate to dissipate heat and prevent thermal damage to the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Custom machine components, Chute liners, Protective shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||