This robust Nylon stock sheet is engineered for rigorous hydraulic systems. Its substantial thickness and superior material properties ensure longevity and reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.787" |
| Length | 36" |
| Width | 25" |
A high-performance industrial component, this Nylon stock sheet is precisely manufactured to a thickness of 0.787 inches, with a standard length of 36 inches and a width of 25 inches. Composed of high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a low coefficient of friction, making it an optimal material for seals, bushings, and wear pads within hydraulic systems. Its inherent chemical resistance further enhances its suitability for environments exposed to hydraulic fluids and moderate pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut component to the hydraulic assembly, verifying proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to rough edges and imprecise cuts. | Employ specialized polymer cutting blades or routers to achieve clean, accurate edges and maintain dimensional integrity. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon sheet. | Use torque-limiting tools and follow recommended torque specifications for Nylon components to prevent over-compression and damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wipers, Pump and valve wear components, Bearing cages and bushings in hydraulic actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||