This 0.757-inch thick Nylon stock sheet is engineered for robust performance in hydraulic systems. It offers superior wear resistance and dimensional stability, ensuring reliable operation under pressure.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.757" |
| Length | 45" |
| Width | 46" |
A proven choice for industrial professionals, this Nylon stock sheet (0.757" thick, 45" length, 46" width) exhibits excellent tensile strength, high abrasion resistance, and a low coefficient of friction, making it ideal for hydraulic components. Its inherent self-lubricating properties reduce wear and extend service life in dynamic applications. Nylon's excellent chemical resistance further enhances its suitability for environments exposed to hydraulic fluids and other common industrial chemicals. This material is widely recognized for its toughness and ability to withstand impact and vibration in demanding hydraulic infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and machining of the Nylon stock sheet are performed to precise tolerances for proper component fit. 2. Clean all mating surfaces thoroughly to prevent contamination of the hydraulic system. 3. Install components manufactured from this Nylon sheet according to the specific hydraulic system's assembly guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect machining speeds, leading to excessive heat buildup and potential material degradation. | Utilize slower cutting speeds and ample coolant when machining Nylon to maintain material integrity. |
| Over-tightening fasteners, which can cause stress cracking in Nylon components. | Adhere to specified torque values during assembly to avoid over-stressing the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Bearing cages in hydraulic pumps, Seals and gaskets for high-pressure systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||