This robust Nylon stock sheet, precisely engineered at 0.717" thickness, offers exceptional strength and durability. Its generous 17" x 37" dimensions make it ideal for fabricating custom solutions in heavy-duty pulling and lifting operations.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.717" |
| Length | 17" |
| Width | 37" |
Built to exacting engineering tolerances, this Nylon stock sheet measures 0.717 inches thick, 17 inches in length, and 37 inches in width. Composed of high-performance polyamide, it exhibits excellent tensile strength, high abrasion resistance, and a low coefficient of friction, crucial for minimizing wear in repetitive motion applications. Its inherent toughness allows it to withstand significant loads and impacts common in industrial pulling and lifting scenarios, ensuring reliability and longevity under stress. This material is also resistant to common chemicals and solvents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Determine the exact dimensions and shape required for the specific pulling or lifting application. 2. Carefully cut the Nylon stock sheet to the precise specifications using appropriate industrial cutting tools. 3. Smooth all cut edges to prevent snagging or premature wear on associated components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or improperly shaped components. | Always fabricate components to the exact dimensions and shape dictated by the load and operational requirements to ensure optimal load distribution and prevent stress concentrations. |
| Failing to deburr or smooth cut edges. | Ensure all cut edges are thoroughly smoothed to eliminate sharp points that can cause material fatigue or abrasion on other components in the system. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads for winch drums, Reinforced guide elements for heavy lifting slings, Protective sheathing for rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||