This robust nylon stock sheet offers exceptional strength and wear resistance, making it a prime choice for critical hydraulic system components. Its durable composition ensures reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.705" |
| Length | 17" |
| Width | 25" |
Manufactured under strict quality controls, this nylon stock sheet boasts a nominal thickness of 0.705 inches, a length of 17 inches, and a width of 25 inches. Composed of high-grade nylon, it exhibits excellent mechanical properties including high tensile strength, superior abrasion resistance, and good impact strength, essential for components within hydraulic systems such as wear pads, seals, and structural supports. Its inherent lubricity also contributes to reduced friction in dynamic applications. Rigorous testing ensures dimensional stability and material integrity for consistent performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of contaminants. 2. Accurately cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the component using manufacturer-recommended fasteners and torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting methods leading to edge fraying or inaccuracies. | Utilize sharp, high-quality cutting tools designed for plastics, such as industrial routers or band saws, and maintain appropriate feed rates to prevent material damage. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ calibrated torque wrenches and use washers to distribute pressure evenly. Consult material datasheets for recommended fastener torque values. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear pads, Seals and gaskets for high-pressure systems, Bushings and bearings in hydraulic machinery, Protective covers for hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||