This industrial-grade Nylon stock sheet offers exceptional strength, abrasion resistance, and chemical inertness. Its robust properties make it ideal for custom fabrication and demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.692" |
| Length | 17" |
| Width | 19" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.692 inches in thickness, 17 inches in length, and 19 inches in width. Crafted from high-density Nylon 6/6, it exhibits excellent tensile strength, wear resistance, and a low coefficient of friction. Its inherent lubricity and resistance to common chemicals, oils, and solvents make it suitable for applications requiring reduced wear and reliable performance under stress. Suitable for machining into complex components, wear pads, bushings, and custom fixtures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly to ensure optimal adhesion or mating. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using industry-standard fasteners or adhesives, as dictated by the application's design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to material stress or chipping. | Utilize sharp, carbide-tipped cutting tools specifically designed for machining Nylon. Ensure adequate coolant is used to prevent overheating. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Apply fasteners with appropriate torque settings. Consider using washers to distribute load over a larger area. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Custom bushings and bearings, Gears and sprockets, Chute liners, Electrical insulation components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||