This high-performance Nylon stock sheet provides exceptional wear resistance and low friction, making it ideal for critical components in demanding hydraulic systems. Its robust material properties ensure longevity and operational efficiency.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.689" |
| Length | 13" |
| Width | 29" |
Specified by design engineers worldwide, this Nylon stock sheet offers superior mechanical strength and excellent resistance to abrasion and chemicals. With precise dimensions of 0.689 inches (17.5 mm) thickness, 13 inches (330 mm) length, and 29 inches (737 mm) width, it is manufactured from premium-grade Nylon, known for its self-lubricating properties and impact resistance. This makes it an optimal choice for fabricating seals, wear pads, bushings, and other essential parts within hydraulic manifold blocks and cylinder components where reliability under pressure is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Smooth all cut edges to prevent stress concentration and ensure proper fit. 3. Install the fabricated component into the hydraulic system, ensuring correct alignment and secure fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge finishing leading to premature wear. | Ensure all cut edges are chamfered or radiused to a smooth finish. |
| Using incorrect machining parameters resulting in material degradation. | Consult material data sheets for recommended cutting speeds, feeds, and coolant usage for Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Components, Wear Pads and Bushings, Sealing Elements, Manifold Block Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||