This premium Nylon stock sheet provides exceptional durability and performance in high-pressure hydraulic systems. Its robust material properties ensure reliability and longevity in challenging operational environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.667" |
| Length | 23" |
| Width | 32" |
Built to exacting engineering tolerances, this 0.667-inch thick Nylon stock sheet measures 23 inches in length and 32 inches in width. Engineered from high-grade Nylon 6/6, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for fabricating components such as wear pads, seals, and hydraulic cylinder components. Its inherent chemical resistance and impact absorption capabilities further enhance its suitability for demanding hydraulic applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine components to precise specifications, ensuring smooth surfaces and proper tolerances. 3. Install fabricated components into the hydraulic system, verifying fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for hard plastics. | Utilize carbide-tipped saw blades or routers specifically designed for cutting Nylon to prevent chipping and ensure clean edges. |
| Over-machining, leading to excessive heat build-up and material deformation. | Employ adequate cooling during machining processes (e.g., flood coolant or air blast) and use sharp tooling to minimize heat generation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic wear rings and guide bushes, Seals and gaskets for hydraulic cylinders, Bearing surfaces in hydraulic equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||