This industrial-grade Nylon stock sheet offers exceptional durability and resistance to pressure and temperature fluctuations. Precisely manufactured to stringent specifications, it's a reliable solution for critical component fabrication.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.657" |
| Length | 22" |
| Width | 33" |
A proven choice for industrial professionals, this Nylon stock sheet measures 0.657 inches in thickness, with dimensions of 22 inches in width and 33 inches in length. Engineered from high-density Nylon, it exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it suitable for demanding pressure and temperature control applications. Its inherent lubricity and chemical resistance further enhance its performance in harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove any contaminants. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated Nylon component using suitable fasteners or adhesives, ensuring proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that may lead to delamination or uneven edges. | Employ carbide-tipped saws or routers specifically designed for cutting plastics to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress cracks in the Nylon material. | Use washers and tighten fasteners to the manufacturer's recommended torque specifications to distribute load and prevent damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure hydraulic component fabrication, Temperature-resistant seals and gaskets, Wear pads and guide rails in automated systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||