This robust Nylon stock sheet offers exceptional strength and wear resistance, making it a superior choice for demanding hydraulic systems. Its dimensional stability and low friction coefficient ensure reliable performance and extended service life in critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.639" |
| Length | 19" |
| Width | 29" |
Built to exacting engineering tolerances, this 0.639" thick Nylon stock sheet measures 19" in length and 29" in width. Composed of high-performance Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, crucial for minimizing wear in hydraulic components. Its inherent toughness and resistance to moisture absorption ensure dimensional stability across a wide range of operating conditions, making it suitable for seals, wear pads, and structural elements within hydraulic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from contaminants. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools (e.g., band saw, CNC router). 3. Smooth all edges to remove burrs and sharp points to prevent premature wear and ensure proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper blade selection, leading to excessive heat and material deformation. | Utilize sharp, carbide-tipped blades designed for plastics and ensure adequate cooling or lubrication during cutting to prevent melting or warping. |
| Over-tightening fasteners, which can cause localized stress concentrations and potential cracking of the Nylon. | Employ appropriate torque settings for all fasteners and consider using washers to distribute load evenly across the surface of the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Wear rings and guide bands, Seals and gaskets, Bushings and bearings, Pump and valve parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||