This robust Nylon stock sheet offers superior wear resistance and a low coefficient of friction, making it ideal for critical hydraulic components requiring durability and smooth operation under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.628" |
| Length | 24" |
| Width | 19" |
Manufactured under strict quality controls, this 0.628" thick Nylon stock sheet provides exceptional mechanical strength and abrasion resistance. Its 24" length and 19" width are precisely cut for optimal material utilization in hydraulic systems. Nylon's inherent self-lubricating properties reduce wear and extend component lifespan in high-pressure environments. This material exhibits excellent impact resistance and is resistant to many common hydraulic fluids and chemicals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely machine the Nylon stock sheet to the required dimensions and tolerances. 2. Ensure all mating surfaces are clean and free of debris. 3. Install the machined Nylon component into the hydraulic system following standard assembly practices for the specific equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper machining leading to out-of-tolerance parts. | Utilize calibrated machining equipment and verify dimensions with precision measuring tools throughout the process. |
| Failure to account for Nylon's slight thermal expansion/contraction in critical clearances. | Design with appropriate allowances for temperature variations to prevent binding or excessive play. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wear rings, Pump components and bearings, Manifold blocks and valve components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||